5390_thuliumpmfiber
thulim_crossrelaxation_dwg_8009
thulium_fiber_cross_section_7801
tmps_core-pumped_fiber_800
tmpd_tmplmad_cladding-pumped_fiber_800
tmss_indexprofile_2502
tmlmad_indexprofile_2501
tmsd_indexprofile_2509

Thulium-Doped PM Optical Fiber

PrintEmail

Polarization-Maintaining Thulium-Doped Optical Fibers




  • Thulium-Doped Fiber for Fiber Lasers and Amplifiers
  • Broad 1.9 - 2.1 µm Emission Region
  • Core-and Cladding-Pumped Versions for up to 500 W Output
  • Polarization-Maintaining Single mode or Large-Mode-Area fibers Available

Features

  • Thulium-Doped Silica Fiber for ~2 µm Fiber Lasers and Amplifiers
  • Panda-Style Polarization-Maintaining (PM) Design
  • Single Mode (SM) and Large Mode Area (LMA) Options Available
  • Core- and Cladding-Pumped Designs for 10 W - 500 W Operation
  • 793 nm, 1180 nm, and 1550 nm Absorption, 1900 - 2100 nm Emission Wavelengths

 

Applications

  • Plastics and Polymer Cutting, Engraving, and Welding
  • Excitation of Biological and Water-Based Samples
  • Industrial and Medical Lasers
  • Lidar Systems
  • Pumping Solid State Crystal Lasers

Thulium (Tm) is an excellent gain medium for 793 nm, 1180 nm, or 1550 nm pumping with emission at wavelengths above 1.9 µm. Hence, Thulium-doped silica fibers can be used to construct fiber lasers and amplifiers operating in the 1.9 - 2.1 µm wavelength range. Wavelengths above 2 µm are readily absorbed by water and polymers, making thulium-based lasers ideal for biological applications, as well as cutting, engraving, and welding plastics.

These fibers have a high thulium concentration with additional doping that provides high efficiencies and prevents photodarkening. Thulium is unique in that a higher doping concentration improves efficiency through cross-relaxation, which is the excitation of adjacent ions for longer wavelength emission (see figure to the right). This property provides higher slope efficiencies as the dopant concentration increases. Thulium-based fiber lasers have been constructed with a maximum slope efficiency of 65%. The high Tm concentration also allows short device lengths while the low NA (single mode or few moded) core design provides robust beam quality. Additional dopants decrease the photodarkening usually observed with high thulium concentrations.

For additional information on the theory of thulium-doped fibers, see "Tm-Doped Fiber Lasers: Fundamentals and Power Scaling". Refer to the Publications tab above for more information about active fibers.

These fibers have a polarization-maintaining design with panda-type stress members. For double-clad fiber, the stress members are in the second cladding so that they do not interfere with pump light in the first cladding. We also offer standard non-PM versions of these fibers.

Connectorization and Splicing
We also do not recommend connectorizing thulium fibers due to the high operating powers and potential for heat build-up. Matched passive fibers are available for splicing into these active fibers.

TMPS single-clad fiber can be spliced similarly to standard single-mode fibers. The TMPD and TMPLMAD double-clad fibers feature a pedestal designed core to provide a low NA core, preventing multimode operation. When splicing to a standard passive fiber, core alignment is critical, as the light must be confined to the core and not leak into the pedestal and first cladding. Many splicing machines can misinterpret the pedestal as the core, leading to alignment errors and high signal losses at the splice.

 

Item #TMPSTMPDTMPLMAD
Nufern Item # PM-TSF-9/125 PM-TDF-10P/130-HE PLMA-TDF-25P/400-HE
Optical Specifications
Core/Clad Type Small Core Single Mode, Single Clad Single Mode, Double Clad Low NA Large Mode Area, Double Clad
Operating Power 10 - 500 W
Pumping Method Core Pumping Cladding Pumping Cladding Pumping
Core Absorption 27.0 dB/m @ 793 nm
9.00 ± 2.0 dB/m @ 1180 nm
N/A N/A
First Cladding Absorption N/A 1.60 ± 0.30 dB/m at 1180 nm
4.70 dB/m at 793 nm
0.80 ± 0.10 dB/m at 1180 nm
2.40 dB/m at 793 nm
Emission Wavelength 1900 - 2100 nm
Cutoff Wavelength 1750 ± 100 nm - -
Mode Field Diameter (nominal) 10.5 µm @ 2000 nm - -
Core Numerical Aperture (NA)(nominal) 0.150 0.150 0.09
First Cladding NA N/A ≥0.46 ≥0.46
V Value at 2 µm 2.1 2.35 3.5
Operation at 2 µm Single Mode Single Mode 2 Modes
Birefringence 2.5 x 10-4 1.5 x 10-4 2.5 x 10-4
Geometrical and Mechanical Specifications
Core Diameter 9 µm 10 ± 1.0 µm 25 ± 2.5 µm
First Cladding Diameter 125 ± 1 µm 130 ± 2 µm 400 ± 15 µm
Coating Diameter 245 ± 15 µm - -
Second Cladding / Coating Diametera - 215 ± 10 µm 550 ± 20 µm
Core-Clad Offser ≤0.50 µm - -
Coating Concentricity --
Coating Material Dual Acrylate Acrylate / Low Index Polymer Mixa
Proof Test Level >100 kpsi (0.7 G/m2)
Strip Toola T06S13 T06S13 T18S25
  • For double-clad fibers, the second cladding / coating is a single layer of mixed acrylate / low index polymer, which is removed during stripping.


Core-Pumped PM Thulium Fiber, Single Clad,

  • Ø9 µm Core with Single Cladding
  • Core-Pumped Design for up to 10 W Output Power
  • Splicing Similar to Standard SM Fibers
  • 0.15 NA, Single Mode Operation

TMPS (Nufern Item # PM-TSF-9/125) is a single-clad, core-pumped thulium-doped fiber. It is ideal for lower-power fiber lasers with up to 10 W of output power. The core-pumped design with single cladding makes this fiber easy to splice. This fiber uses a panda stress rod design in the cladding for polarization-maintaining performance.

 

Cladding-Pumped PM Thulium Fiber, Double Clad,

  • Ø10 µm Core with Pedestal and Double Cladding
  • Cladding-Pumped Design for up to 50 W Output Power
  • 0.15 Effective Core NA, Single Mode Operation
  • First Cladding with 0.46 NA for Pumping

TMPD (Nufern Item # PM-TDF-10P/130-HE) is a double-clad, cladding-pumped thulium-doped fiber. A pedestal design ensures a low NA and single-mode operation in the core, while the first cladding with 0.46 NA allows for easy pump light coupling. Extra care must be taken when splicing so that the light stays confined to the core or first cladding, and not the pedestal. This fiber uses a panda stress rod design in the second cladding for polarization-maintaining performance.

 

Cladding-Pumped PM LMA Thulium Fiber, Double Clad, 10-500 W Output

  • Ø25 µm Core with Pedestal and Double Cladding
  • Cladding-Pumped Design for 10 - 500 W Output Power
  • 0.09 Effective Core NA, Single Mode Operation
  • First Cladding with 0.46 NA for Pumping

TMPLMAD (Nufern Item # PLMA-TDF-25P/400-HE) is a double-clad, cladding-pumped thulium-doped fiber. A pedestal design provides a low NA and large mode area operation with approximately two modes in the core, while the first cladding with 0.46 NA allows for easy pump light coupling. Extra care must be taken when splicing so that the light stays confined to the core or first cladding, and not the pedestal. This fiber uses a panda stress rod design in the second cladding for polarization-maintaining performance.

ABOUT US

Our Mission is to accelerate the advancement of optical technology for precision measurements and their applications from the table tops of research laboratories to standard use in communication and high technology industries. Our aim is to serve our customers. Our hope is to create a place for highly skilled people in an open environment

contact us

Tel               +966 35823441
Fax               +966 35823441
Egypt Mobile  +2 0120 7577664
KSA Mobile     +966 545 991188
Email             This email address is being protected from spambots. You need JavaScript enabled to view it.

newsletter