2437_ld-operationstarterset
2437_ld-operationstarterset3
3477_cab430_sgl

LD / TEC Controller and Mount Kit

PrintEmail

Complete Laser Diode Operation Starter Set




  • Bundles LD Controller, TEC COntroller, LD Mount, and Accessories
  • Ideal for Stable and Safe Operation of Standard Laser Diodes

Included Items:

  • Benchtop LD Current Controller ±500 mA HV: LDC205C
  • Benchtop Temperature Controller, ±2 A / 12 W: TED200C
  • TEC LD Mount: TCLDM9
  • All Connection Cables
  • Spanner Wrench for M9 x 0.5 Housing: SPW301
  • Spanner Wrench for SM1 Adapters: SPW909
  • TR Series Post: TR3
  • Post Holder for TR Series Post: PH3
  • Mounting Base: BA2
  • Optic Adapter: S1TM09
  • Locking Nut: SM1NT
  • Grounding Wrist Strap: WS02
  • AR-Coated Collimation Optic
    • For 400 - 600 nm: C230TME-A
    • For 600 - 1050 nm: C230TME-B
    • For 1050 - 1550 nm: C230TME-C

The LTC100 Series is a complete laser diode and temperature controller set including mount, optic and accessories. It combines the benchtop LD Current Controller LDC205C and the benchtop Temperature Controller TED200C and other required items for a stable and safe operation of standard laser diodes.

The kit is offered in three versions depending of the anti-reflection coating of the collimation optic: LTC100-A for 400 - 600 nm, LTC100-B for 600 - 1050 nm and LTC100-C for 1050 - 1550 nm. For detailed information about the components, please see the links to the product pages of the components list above. Each unit ships with two cables, one for the temperature controller (CAB420-15) and one for the laser diode controller (CAB400). Although all necessary cables are packaged with the purchase of the controllers and starter sets presented above, replacements can be purchased separately.

The TED200C and LDC205C operate with a line voltage of 100, 115, or 230 VAC. These sets are shipped with imperial mounting posts and holders. The mounting base is compatible with both imperial and metric systems.

 

Item #LDC205C
LD Current Control Range 0 to ±500 mA
Compliance Voltage >10 V
Photocurrent Control Range 25 µA to 10 mA
Small Signal 3dB Bandwidth, CC Mode DC to 150 kHz
Item #TED200C
TEC Current Control Range -2 A to +2 A
Compliance Voltage >6 V
Maximum Output Power 12 W
Thermistor Control Range 10 Ω to 20 kΩ /
100 Ω to 200 kΩ (2 Ranges)
Supported IC Sensors AD590, AD592, LM135, LM335

 

Additional Connector Cables

 
Pin #CAB 400
(9 Pin Male)
  CAB400 9 Pin Diagram
1 Interlock and Status LASER ON/OFF
2 Photodiode Cathode
3 Laser Diode Ground
4 Photodiode Anode
5 Ground for Pin 1
6 N.C.
7 Laser Diode Cathode (with Polarity Anode Grounded - AG)
8 Laser Diode Anode (with Polarity Cathode Grounded - CG)
9 N.C.
Pin #CAB 420-15
(15 Pin Male)
  CAB420-15 15 Pin Diagram
1 Status LED (+) (for TEC ON/OFF indication)
2 N.C.
3 Thermistor (-), Ground
4 Thermistor (+)
5 TEC (+)
6 TEC (+)
7 TEC (+)
8 LM 135/335 (-), Ground
9 N.C.
10 Transducer AD 590/592 (-), LM 135/335 (+)
11 Transducer AD 590/592 (+), LM 135/335 (+)
12 N.C.
13 TEC (-), Status LED (-)
14 TEC (-), Status LED (-)
15 TEC (-), Status LED (-)
CAB 420-15
(9 Pin Female)
CAB420-15 9 Pin Diagram
Status LED (+) (for TEC ON/OFF indication)
Thermistor (+)
Thermistor (-), Ground
TEC (+)
TEC (-), Status LED (-)
N.C.
Transducer AD 590/592 (-), LM 135/335 (+)
LM 135/335 (-), Ground
Transducer AD 590/592 (+), LM 135/335 (+)

ABOUT US

Our Mission is to accelerate the advancement of optical technology for precision measurements and their applications from the table tops of research laboratories to standard use in communication and high technology industries. Our aim is to serve our customers. Our hope is to create a place for highly skilled people in an open environment

contact us

Tel               +966 35823441
Fax               +966 35823441
Egypt Mobile  +2 0120 7577664
KSA Mobile     +966 545 991188
Email             This email address is being protected from spambots. You need JavaScript enabled to view it.

newsletter