32_smconnector-lcpc_2
325_smconnector-lcpc_2
1976_capl_sgl

Single Mode LC/PC Connector

PrintEmail

LC/PC Fiber Connectors: Single Mode




  • Snap-In Connector
  • Ø126 µm Central Bore
  • Spring-Loaded, Ceramic Ferules
  • Maximum Concentricity of 1 µm

Features

  • LC®/PC Connector
  • Smaller Ferrule and Housing Size than SC/PC Connectors
  • Spring-Loaded, Ø1.25 mm, Ceramic Ferrule
  • Strain Relief Boot for Ø900 µm Tubing and Connector Cap Included

This LC®/PC (Lucent Connector / Physical Contact) connector was developed to meet the need for smaller and easier-to-use fiber optic connectors. The LC/PC connector reduces space required on panels by 50% compared to SC/PC connectors. Packaged with a strain relief boot for Ø900 µm tubing and a dust cap, this connector has a Ø1.25 mm, spring-loaded, ceramic ferrule and a typical insertion loss of 0.10 dB. For temporary termination, our BFTU Bare Fiber Terminator can be used with this LC/PC connector. Thorlabs also offers loose ceramic LC/PC ferrules as well as splice-ready LC/PC connectors. LC is a registered trademark of Lucent Technology.


LC/PC Fiber Connectors: Single Mode

Item #StyleBoreConcentricityInsertion LossReturn LossOperating TemperatureFerruleIncluded BootCrimp Toola
30126L9 LC/PC Ø126 +1/-0 µm 1 µm 0.10 dB
(Typical)
55 dB
(Typical)
-40 to 75 °C Ø1.25 mm, Ceramic,
Spring Loaded
Ø900 µm Not Required
  • A crimp tool is not required for Ø900 µm boots. For more details, please see our FN96A Connectorization Guide.

 

Dust Cap


The CAPL Dust Cap is for use with Ø1.25 mm fiber connector ferrules. Dirt on the fiber tip can cause permanent damage to the fiber connector, which can result in increased coupling losses or undesirable mode structure in the output light. To prevent damaging the connectorized fiber, clean it before each use and use a fiber connector cap to protect the end face of the connectorized fiber when it is not in use.

ABOUT US

Our Mission is to accelerate the advancement of optical technology for precision measurements and their applications from the table tops of research laboratories to standard use in communication and high technology industries. Our aim is to serve our customers. Our hope is to create a place for highly skilled people in an open environment

contact us

Tel               +966 35823441
Fax               +966 35823441
Egypt Mobile  +2 0120 7577664
KSA Mobile     +966 545 991188
Email             This email address is being protected from spambots. You need JavaScript enabled to view it.

newsletter