• Pana Vise
  • Toolmakers Vise

These Pana vise is designed to be bolted onto a working surface while the Toolmaker vise has a flat bottom and sides, which allows it to be set horizontally or vertically on any flat working surface.

Pana Vise

* Vise Jaws Mounted on a Split-Ball Joint: 90° Tilt, 360° Turn, and 360° Rotation
* Nominal Dimensions of Jaws: 2.5" (64 mm) Wide x 0.5" (13 mm) Tall with 2.25" (57 mm) Capacity
* Nylon Jaws: Electrically Isolated, Non-Marring
* Nominal Overall Height: 6.25" (160 mm)

The PV1 Pana Vise can be secured to the working surface in three places using the Ø1/4" (6.4 mm) countersunk mounting holes located on a bolt circle that is 4.31" (109.5 mm) in diameter. The vise jaws are mounted on a post that slides into the split-ball joint. This arrangement allows the vise jaws to turn 360° on the post as well as rotate 360° and tilt 90° using the ball. All three degrees of freedom are locked down using a single locking knob, which makes the Pana Vise easy to orient so that the part being held can be worked on at the optimal angle.


Toolmakers Vise

* Machined from Cast and Ground Tool Steel
* V-Groove Machined into Jaws for Holding Round Stock
* Nominal Dimensions of Jaws: 2.5" (64 mm) Wide x 1.5" (38 mm) Deep with 2.5" (64 mm) Jaw Capacity
* Flat Base and Sides
* Weight (Mass): >5 lbs (11 kg)

The TMV2 Toolmakers Vise is ideal for use in the machine shop. The tool steel vise has a flat bottom and sides that allow the vise to lay flat on all three surfaces. This vise is an excellent choice for holding small parts that are being drilled and tapped for mounting holes.


Our Mission is to accelerate the advancement of optical technology for precision measurements and their applications from the table tops of research laboratories to standard use in communication and high technology industries. Our aim is to serve our customers. Our hope is to create a place for highly skilled people in an open environment

contact us

Tel               +966 35823441
Fax               +966 35823441
Egypt Mobile  +2 0120 7577664
KSA Mobile     +966 545 991188
Email             This email address is being protected from spambots. You need JavaScript enabled to view it.