periscope_780
4761_rs99_sgl
4762_rs99t_sgl
5433_rs99b_sgl

Kinematic Periscope Mount

PrintEmail

Periscope Assembly




  • Height Adjustment with ±4° Pitch, Yaw and 360° Rotation
  • Periscope Components Also Offered

Features

  • Periscope Assembly Designed for Use with Ø1" (Ø25.4 mm) Optics
  • Minimum Optic Thickness: 0.13" (3.3 mm)
  • Complete Assembly (RS99) Redirects and Changes the Height of a Beam Within an Optical System
  • Fabricated from Black Anodized Aluminum
  • Components Sold Separately for Wider Range of Height Adjustment

The RS99 Periscope Assembly (pictured right) provides a convenient way to redirect and change the elevation of a beam within an optical system. The system consists of a pair of 45° mirror mounts with lockable adjustment knobs to provide 360° of rotation of the incoming light.

The top unit, which can be purchased separately below, provides pitch, yaw, and rotation control. It features 360° of continuous rotation as well as ±4° tip and tilt with an adjustment per revolution of 8 mrad/rev. This unit can hold Ø1" optics that are at least 0.13" (3.3 mm) thick.

The bottom unit, which can also be purchased separately below, provides a right angle mirror mount for Ø1" optics as well as a clear aperture for beam sampling. This unit is mounted to the Ø1" post using a 360° continuous rotation pillar post clamp.

 

Complete Periscope Assembly

 

  • Redirects and Changes the Height of a Beam Within an Optical System
  • Designed for Use with Ø1" (Ø25.4 mm) Optics
  • 360° Continuous Rotation with ±4° Tip and Tilt
  • Includes CF175 Clamping Fork and 6" (150 mm) Tall RS6 (RS150/M) Post

The upper housing of the RS99 provides fine control, which can be used to compensate for angular deviations of the input beam relative to the Ø1" (Ø25.4 mm) optic. The included 6" tall post [RS6 (RS150/M)] can be extended using Ø1" Pillar Post Extensions and the included thread adapter.

 

Top Unit

 

  • Designed for use with Ø1" (Ø25.4 mm) Optics
  • 360° Continuous Rotation with ±4° Tip and Tilt
  • Includes Kinematic Post Clamp

The RS99T Top Unit (pictured to the left) is offered for customers who want to create their own periscope assembly on an arbitrary length Ø1" Pillar Post or post assembly. This assembly includes the kinematic post clamp with ±4º tip and tilt in addition to 360º continuous manual adjustment. The bottom rotator, post, base, and clamping fork packaged with the RS99 periscope assembly featured above are not included with the RS99T.

 

Bottom Unit

 

  • Designed for use with Ø1" (Ø25.4 mm) Optics
  • 360° Continuous Rotation
  • Clear Aperture for Beam Sampling

The RS99B Bottom Unit (pictured to the left) provides customers a right angled mirror mount for use in a periscope assembly on an arbitrary length Ø1" Pillar Post or post assembly. This unit includes the 360º continuous rotation post clamp. The top rotator, post, base, and claming fork packaged with the RS99 periscope assembly featured above are not included with the RS99B.

ABOUT US

Our Mission is to accelerate the advancement of optical technology for precision measurements and their applications from the table tops of research laboratories to standard use in communication and high technology industries. Our aim is to serve our customers. Our hope is to create a place for highly skilled people in an open environment

contact us

Tel               +966 35823441
Fax               +966 35823441
Egypt Mobile  +2 0120 7577664
KSA Mobile     +966 545 991188
Email             This email address is being protected from spambots. You need JavaScript enabled to view it.

newsletter