6490_cl5_sgl
cl5_tableclamp_780
6491_cl2_sgl
cl2_app3_780
6492_cl3_sgl
cl3_tableclamp_780
6493_cl6_sgl
cl6_tableclamp_780
6494_cl4_sgl
cl4_tableclamp2_780
6495_cl8_sgl3
cl8_tableclamp2_7803

Table Clamps

PrintEmail

Table Clamps




  • Secure Optomechanical Assemblies to Tables and Breadboards
  • Versatile and Distinct Designs for Virtually Any Situation
  • Solid One-Piece Construction

Options

  • CL5: General-Purpose Clamp
  • CL2: Heavy-Duty Clamp with Adjustable Height
  • CL3: Compact Clamp with Adjustable Height
  • CL6: Wedged for Use with RLA Series Optical Rails
  • CL4: Compact Clamp for Tight Spaces
  • CL8: Table Clamp for Ø1" and Ø1.5" Pedestal Posts

The CL Series Table Clamps are widely used when constructing optomechanical assemblies. Their ability to adapt complex, unforgiving layouts to any mounting hole pattern saves time and headaches, significantly reducing setup times. These clamps are used with 1/4"-20 (M6) cap screws and washers, which are available as part of our Screw Kits.

Adjustable Height Options

Particularly useful are the CL2(/M) and CL3(/M) clamps, which use one cap screw for height adjustment and another for lockdown, as shown below. This design allows a downward force to be directed onto any object, securely clamping the object and preventing slippage.

 

 

 

 

General-Purpose Table Clamp


The CL5 table clamp is by far our most popular table clamp. Its simple design is compatible with most common optomechanics. It only requires one cap screw and washer to secure and the rounded edge increases the surface area where the optomechanic is contacted.

 

Heavy-Duty Table Clamp with Adjustable Height


The CL2(/M) heavy-duty table clamp uses two cap screws: one in the 1/4"-20 (M6) tapped hole to adapt the clamp to virtually any height and another in the slotted hole to secure the clamp to the table. The extra-long design increases the torque exerted on the optomechanic being held.

 

Compact Table Clamp with Adjustable Height


The CL3(/M) table clamp uses two cap screws: one in the 1/4"-20 (M6) tapped hole to adapt the clamp to virtually any height and another in the slotted hole to secure the clamp to the table. Its compact design reduces the footprint of the clamp relative to the CL2(/M).

 

Wedged Table Clamp for RLA Series Rails


The CL6 clamp features a wedged tip that is specifically designed to fit our RLA series of optical rails, allowing an RLA rail to be secured along any direction on a breadboard or optical table. The low-profile clamp has the same height as an RLA rail, although its presence can restrict the placement of rail carriers.

 

Compact Table Clamp for Tight Spaces


At just 1.38" (35 mm) long and 0.63" (16 mm) wide, the CL4 table clamp is our most compact table clamp option, designed for situations where table space is at a premium. It uses a one-screw design.

 

Table Clamp for Ø1" and Ø1.5" Pedestal Posts


The CL8 pedestal post table clamp is designed for use with our Ø1" and Ø1.5" pedestal posts. Its V-shaped tip provides two-point contact with the perimeter of the post and its rounded edge increases the contact area along the optical table or breadboard.

ABOUT US

Our Mission is to accelerate the advancement of optical technology for precision measurements and their applications from the table tops of research laboratories to standard use in communication and high technology industries. Our aim is to serve our customers. Our hope is to create a place for highly skilled people in an open environment

contact us

Tel               +966 35823441
Fax               +966 35823441
Egypt Mobile  +2 0120 7577664
KSA Mobile     +966 545 991188
Email             This email address is being protected from spambots. You need JavaScript enabled to view it.

newsletter