cv1526_app_tab_780
2067_c1500_sgl
c1500_all33_780
2037_c1498_sgl
c1498_app2_780
168_c1526_sgl
c1526_app_780
5811_vertcageclampmnt_sgl
172_ma4_ma1_sgl
ma4_app_780

Ø1½” Post Accessories

PrintEmail

Ø1.5" Post Construction Accessories




  • Ideal for Securing Our Wide Range of Optic Mounts to Our Ø1.5" Stainless Steel Posts
  • Rigid Construction Provides the Stabilitiy Required for Highly Sensitive Alignment Assemblies

These Ø1.5" post mounting adapters provide direct compatibility with virtually all of our Optomechanics, allowing a wide range of parts to be directly mounted to our rigid P-Series Posts.

Compact Post Clamp
Allows optic mounts with 8-32 (M4) tapped mounting holes to be attached to a Ø1.5" post. The angle of the optic mount can be adjusted easily using the knurled knob.

  • Attach Optics Mounts with 8-32 (M4) Taps to Ø1.5" P-Series Posts
  • Knurled Knob for Quick Angle Adjustment
  • Four Holes on the Knob for Extra Tightening

The C1500 Post Clamp allows optic mounts with 8-32 (M4) tapped mounting holes, such as the LMR1 shown in the application to the right, to be attached to a Ø1.5" post.  The angle of the optic mount can be set  while the knurled knob is used to thread the device onto the C1500 . For final tightening, four holes are provided on the knob allowing a 5/64 (2 mm) hex wrench to be inserted and used to obtain sufficient torque to securely lock the mount in place .

 

Slip-On Post Clamps
Can be used for mounting either 1/4"-20 (M6) or 8-32 (M4) components (when using the SD1 counterbore adapter ring) onto our Ø1.5" Posts.

  • Mount 1/4"-20 (M6) or 8-32 (M4) Components Onto our Ø1.5" P-Series Posts
  • Lock to Post with Non-Marring Brass Locking Screw
  • Two 8-32 (M4) Tapped Holes are Provided for Optic Mounts with #8 (M4) Counterbored Holes
  • SD1 Adapter used with 1/4" (M6) Counterbored Hole for Optic Mounts with 8-32 (M4) Threading

 

 

Cage Clamp Mounts
Allow cage assemblies to be securely attached in a horizontal or vertical direction to our Ø1.5" Posts using a quick-connect mechanism.

  • Securely Attach 30 mm or 60 mm Cage Assemblies to our Ø1.5" P-Series Posts
  • Quick-Connect Mechanism for Fast Drop-In/Drop-Out of Cage Assemblies
  • Two 8-32 (M4) Tapped Holes are Provided for Optic Mounts with #8 (M4) Counterbored Holes
  • An Additional 3/16" (5 mm) Hex Cap Screw is Provided as the Main Quick-Connect Cage Clamping Mechanism

 

Ø1.5" Post Vertical Cage Clamp Mounts

 

  • Mount 30 mm Cage Systems Vertically to Our 1.5" Posts
  • Quick-Connect Mechanism for Fast Drop-In/Drop-Out of Cage Assemblies
  • Spaced such that the Optical Axis of the 30 mm Cage System Aligns with Tabbed Holes of the Imperial Breadboards (Not Applicable to Metric Breadboards)
  • 15 lb (6.8 kg) Load Capacity

 

Post Mounting Adapters
Function as a mounting platform on to out P-series post. Offers an array of 1/4"-20 (M6) and 8-32 (M4) tapped hole and counterbore combinations.

  • Can be used as a Mouting Platform to Connect a Wide Range of our Optic Mounts and Translation Stages to our Ø1.5" P-Series Posts
  • Offers an Array of 1/4"-20 (M6) and 8-32 (M4) Tapped Hole and Counterbore Combinations

ABOUT US

Our Mission is to accelerate the advancement of optical technology for precision measurements and their applications from the table tops of research laboratories to standard use in communication and high technology industries. Our aim is to serve our customers. Our hope is to create a place for highly skilled people in an open environment

contact us

Tel               +966 35823441
Fax               +966 35823441
Egypt Mobile  +2 0120 7577664
KSA Mobile     +966 545 991188
Email             This email address is being protected from spambots. You need JavaScript enabled to view it.

newsletter