HomeProductsOptomechanicsOptomechanical DevicesDichroic Filter Wheel for 30 mm Cage System
cdfw_appshot_780px
510_dichroicfilterwheels
5109_dichroicfilterwheels
individual_filter_780px
cdfw5_appshot_780px
cdfw5_appshot1_780px

Dichroic Filter Wheel for 30 mm Cage System

PrintEmail

Manual Dichroic Filter Wheel for 30 mm Cage System




  • Mounts Five Rectangular Dichroic Filters
  • Input and Output Ports at a 45° Angle to the Filter
  • Removable Filter Wheel
  • Light Tight

Features

  • Mounts Five 25.2 mm x 35.6 mm Dichroic Filters or 25 mm x 36 mm Dichroic Mirrors
  • Compatible with 30 mm Cage and SM1 (1.035"-40) Lens Tube Assemblies
  • Magnetically Coupled Filter Holders
    • Delrin Clamps Flex to Reduce Stress on Filters and Prevent Damage
  • Light-Tight Filter Wheel

Thorlabs' CDFW5 Manual Filter Wheel is designed for use with dichroic filters for fluorescence or wavelength separation applications. The mounting block has four light ports, all of which are oriented at 45° to the plane of the filter. This allows the user access to the through and perpendicular light paths.

The filter wheel is equipped with four 6mm holes and SM1 threading on each port for compatibility with our 30mm cage and SM1 (1.035"-40) lens tube systems. Two 8-32 (Imperial) or M4 (Metric) mounting holes on the bottom of the mounting block allows the wheel to be post mounted.

The light-tight filter wheel cover is magnetically coupled and can be easily removed by hand, exposing the five filter holders. Each magnetically coupled filter holder can be pulled free from the central hub to facilitate removal and replacement of a filter without disassembling or disturbing the setup. By removing one 1/4"-20 shoulder screw on the front of the housing as well as loosening the thumbscrew on the back of the housing, the entire wheel can be removed from a fixed cage setup.

An indent at each position secures the wheel in position when making a filter change. A small window on the filter wheel housing indicates the current filter position, as shown in the image at the top of the page.

Mounting Service
If any of our microscopy filters is ordered at the same time as the CDFW5, Thorlabs will premount the filter at no additional charge.

ABOUT US

Our Mission is to accelerate the advancement of optical technology for precision measurements and their applications from the table tops of research laboratories to standard use in communication and high technology industries. Our aim is to serve our customers. Our hope is to create a place for highly skilled people in an open environment

contact us

Tel               +966 35823441
Fax               +966 35823441
Egypt Mobile  +2 0120 7577664
KSA Mobile     +966 545 991188
Email             This email address is being protected from spambots. You need JavaScript enabled to view it.

newsletter